, li ne. 20 stern ave. springfield, new jersey 07081 u.s.a. telephone: (973) 376-2922 (212)227-6005 fax: (973) 376-8960 40HF(r) series standard recovery diodes stud version features high surge current capability stud cathode and stud anode version leaded version available types up to 1600v vrr|v] 40 a typical applications battery charges converters power supplies machine tool controls welding major ratings and characteristics parameters f(av) @tc f(rms) ifsm @50hz @60hz i2t @50hz @60hz vrrm ra"9e tj range 40HF(r) 10 to 120 140,160 40 40 140 ! 110 62 570 595 1600 1450 100*01200 1400,1600 - 65 to 190 -65 to 160 units a "c a a a a2s a2s v "c nj semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. information furnished by nj semi-conductors is believed to be both accurate and reliable at the time of going to press. however, nj semi-conductors assumes no responsibility for any errors or omissions discovered in its use. nj semi-conductors encourages customers to verify that datasheets are current before placing orders. quality semi-conductors
40hrr) series electrical specifications voltage ratings type number 40HF(r) voltage code 10 20 40 60 80 100 120 140 160 vrrm, maximum repetitive peak reverse voltage v 100 200 400 600 800 1000 1200 1400 1600 vrsm, maximum non- repetitive peak reverse voltage v 200 300 500 700 900 1100 1300 1500 1700 'rrm max' @ tj - tj max. ma 9 45 forward conduction if vji max average forward current @ case temperature if:rms, max. rms forward current t|sm max peak, one-cycle forward, non-repetitive surge current l!t maximum h for fusing i2vt maximum iv! for fusing vf|t0. value of threshold voltage (up to 1200v) vrtoi value of threshold voltage (for 1400v, 1600v) r. value of forward slope resistance (up to 1200v) r( value of forward slope resistance (for 1400v. 1600v) vfm max forward voltage drop 40HF(r) 10to120 140,160 40 40 140 110 62 570 595 480 500 1600 1450 1150 1050 16000 0.65 076 4.29 3 8 1.30 1.50 a "c a a2s a-'vs v v 180" conduction, half sine wave t - 10ms no voltage t = 8.3ms reapplied t = 10ms ; 100% v;;qm t = 8.3ms reappiied sinusoidal half wave, t = 10ms no votlage initial t ( = t , max. t = 8,3ms reapplied t = '10ms 100% vrrh t - 8.3ms reapplied t = 0.1 to 10ms, no voltage reapplied t.^max, t = t max. tt = t, max t , - t ! max lpk= 125a, tj = 25'c, tp = 400ps rectangular wave
40HF(r) series thermal and mechanical specifications t max junction operating temperature range t max. storage temperature range rthj,- max. thermal resistance, junction to case r(hrs max. thermal resistance, case to heatsink t max allowed mounting torque 1 0% wt approximate weight case style 40HF(r) 1010120 14010160 -65to 190 -6510 160 -65 to 190 -65 to 160 0.95 0.25 23-3,4 20-30 17(0.6) do-203ab(do5) k/w nm ibf-in g(oz) dc operation mounting surface, smooth, flat and greased not lubricated threads unleaded device see outline table arthjc conduction (the following table shows the increment of thennal resistance rlkjc when devices operate at different conduction angles than dc) conducti on angle 180" 120" 90 60 30" sinusoidal conduction 0 14 0.16 0.21 030 0 50 rectangular conduction 0,10 0.17 0.22 031 0,50 units k/w conditions tj = t max ordering information table device code d q 40 hf 160 m 40 = standard device 41 = not isolated lead 42 = isolated lead with silicone sleeve (red = reverse polarity) (blue = normal polarity) standard diode none = stud normal polarity (cathode to stud) r = stud reverse polarity (anode to stud) voltage code: code x 10 = vrrm (see voltage ratings table) none = stud base do-203ab (do-5) 1/4" 28unf-2a m = stud base do-203ab (do-5) m6 x 1
40HF(r) series outlines table r~~ ./; , .1 . a "s^ij.irjf'*iiiiij=ii'--'4 rt" v -i 7' 41hf(r) case style do-203ab (do-5) all dimensions in millimeters (inches) 40HF(r) case style do-203ab (do-5) all dimensions in millimeters (inches) 11 (0.43) max. i '*- 6.3 (0.25) max.
|
